KONECT MULTI60-PLUS AC-DC 60W multifunction Charger

KN-MULTI60-PLUS

KONECT-RC

  • £44.00


KONECT MULTI60-PLUS AC-DC 60W multifunction Charger

The Multi 60 charger is a multifunction charger that can charge different types of batteries (Lipo, Lion, Life, Nimh, Nicd and Pb). Its 60W charging power can charge batteries up to 6A with optimal safety. The plug for the charging cord is an XT60 plug. The charger comes with a charging cable for Dean and Tamiya plugs.

TECHNICAL SPECIFICATIONS



UK LEAD INCLUDED (not shown in images)

  • Input voltage: AC 100-240V
  • Circuit power: Max. load 60W - Max. 10W discharge
  • Charging current: 0.1-6.0A
  • Discharge current: 0.1-2.0A
  • Li-Po balancer current: 300mAh/cell
  • Types of lithium batteries; Lipo, Lion and Life
  • NiCd/NiMH Cells: 6-8 Cells
  • Lithium elements: from 2 to 4S (7.4V to 14.8V)
  • Lead load: 6V (3P) - 12V (6P)
  • Net weight: 302g
  • Dimensions: 115 x 112 x 55mm





FEATURES:

Optimized operating software

When charging or discharging, an "AUTO" function sets the supply current automatically. Particularly for Lithium batteries, this mode prevents overcharging. All programs are checked for possible errors in order to maintain optimal security. They can be programmed as an option.


Individual balancing of discharging cells

It can also monitor the balance of Lithium battery cells during the discharge process. If the voltage of one of them is abnormal, the discharge will be interrupted followed by an error message.


Optimized for multiple Lithium battery types

It supports 3 types of batteries: Li-on, Li-Po and Li-Fe. Each has different characteristics due to their chemical design. You must select one of them before starting the charging process.


Lithium battery, "fast charge" and "storage" modes

This charger offers a quick charge function for lithium batteries and a "storage" function to improve the life of the batteries and prevent them from swelling when not used for a long time.


Maximum security

- Sensitivity of the Delta-peak: the automatic stopping of the charge resides in the principle of voltage detection by the Delta-peak (NiCd/NiMH). When the battery voltage exceeds the maximum threshold, the charging process ends automatically.

- Current limitation in auto-charging: When you charge NiMH or NiCd in "Auto" mode, you can define the ceiling of the charging current to avoid too high a rate. This is very useful when using slow charge and low capacity NiMH battery in this mode.

- Capacity Limit: Load capacity is always calculated by multiple currents and times. If the load capacity exceeds the limit, the process will be automatically stopped once the set maximum value is reached.

- Temperature limit: the temperature of a battery during charging may increase due to an internal chemical reaction. If you program a maximum temperature, the charge will be interrupted once the limit has been passed.

(IMPORTANT: this function is available by connecting an optional temperature probe, not included with the charger).

- Charging time limit: you can also limit the maximum maximum charging time to warn of a possible fault.

- Charger power supply: to protect the car battery when using mains power (220V), the voltage is constantly monitored. If it falls below the limit, the process will be terminated automatically.


Database / loading

Your charger is equipped with a memory allowing it to store up to 5 different programs. You can establish a database containing the settings of the charging or discharging schedules of different batteries.


Charge and discharge cycles

Run 1-5 cycles charge > discharge > charge continuously to refresh and balance a battery.


We Also Recommend